TG110 High Precision Inbuilt Printer Coating Thickness Gauge
This compact, handy pocket gauge is designed for non-destructive,
fast and precise coating thickness measurement. The principal
applications lie in the field of corrosion protection. It is ideal
for manufactures and their customers, for offices and specialist
advisers, for paint shops and electroplaters, for the chemical,
automobile, shipbuilding and aircraft industries and for light and
heavy engineering.
Technical parameters
Probe type | F | N |
Measuring principle | Magnetic induction | Eddy current |
Measuring range | 0～1500 um | 0～1500 um |
Low range resolution | 0.1 um | 0.1 um |
Accuracy | Zero calibration | ±(2%H+1) um | ±(2%H+1) um |
Two point calibration | ±[(1～2)%H+1] um | ±[(1～2)%H+1] um |
Measuring Condition | Min. radius of curvature | Cx. 1.5 mm | Cx. 3 mm |
Min. radius of area | Φ7 mm | Φ5 mm |
Critical thickness of plate | 0.5 mm | 0.3 mm |
Note: H – nominal value of thickness
Working environment
l Temperature:0℃～40℃
l Humidity:20%RH～90%RH
l Without strong magnetic field
Power
l 2*3.7V Rechargeable lithium batteries
Size and weight
l Size: 198mm×82mm×30mm
l Weight:about 320g
Features:
l With different external probes, the gauge can be applied to
measuring thickness of non-magnetic coating on magnetic metal
substrate, as well as non-conductive coating on non-magnetic metal
substrate.
l Two measuring modes: single or continuous, changeable.
l Two work modes: direct or group, changeable.
l High precision mode: multiple measurements and automatically data
filtering method to reduce disturbance of measure results
l Temperature compensation: compensate the measurement distortion
caused by the drifting of temperature.
l Give five statistical values: average, maximum, minimum, measure
number, and standard deviation.
l Two calibration methods can be applied to the gauge; and the system
error of the probe can be corrected with the basic probe
calibration method.
l Data storage: up to 500 measurements storage.
l Set boundary: alarm while measurements out of boundary.
l Battery information indicates the rest capacity of the battery.
l Beep prompting.
l Auto power off function to conserve battery life.
Configuration
Item | Quantity | Remarks |
Main Unit TG110 | 1 | |
Probe | 1 | F or N or FN |
Calibration Foils | 5 PCS | |
Zero plate | 1 | Iron or Aluminum |
Battery | 1 | CR123A, 3V |
User Manual | 1 | |
Certificate | 1 | |
Warranty card | 1 | |
Feedback submission | 1 | |
