Blue tooth connection to mobile function FD560 Ultrasonic Flaw
Detector
1. User friendly dialog interactive helps operations like
Calibration, making curves, etc.
2. All tools you need: DAC, AVG, TCG AWS, etc.
3. Pulse Repeatition Frequency: 10-2000Hz precise adjust, high
speed scan, no miss out.
4. High Signal to noise ratio, clear and stable echo, anti-noise
design, perfect for tough working conditions.
5. 12-digit AD, high speed sampling leads to better echo diagram
with all details. Sensitive and can detect even tiny flaws.
6. Can use probe frequency 20M perfectly .
7. IP65 standard. Protective rubber casing. Damping support makes
it stands in any angle.
8. Battery lasts 15 hours for one charge.
Specifications
| Range | 0-10000 mm ,at steel velocity |
| Material Velocity | 100～20000 m/s |
| Pulse Repetition Frequency | 10-2000Hz |
| Dynamic range | ≥38dB |
| Linearity: Horizontal | +/-0.2%, Vertical: 2.0%(Horizontal:+/-0.2% FSW Vertical: 0.25% FSH
) |
| Resolving Power | >40dB (5P14) |
| Sensitivity Leavings | >68dB |
| Reject (suppression) | 0 to 80% full screen height |
| Test Modes | Pulse echo, dual element and thru-transmission |
| Probe Types | Single Straight, Single Angle, Dual Straight, Dual
Angle,Through,Creeping,Surface |
| Gate Monitors | Two independent gates controllable over entire sweep range |
| Units | Inch or millimeter |
| Power Requirements | AC Mains 100-240 VAC, 50-60 Hz |
| Display Delay | -20 to 3400 µs |
| Probe Delay/Zero Offset | 0 to 99.99µs |
| H×W×D(mm) | 250×165×55 (mm) |
| Weight | 1.2kg |
| Operating Temperature | -10℃ to 50℃ |
| Storage Temperature | -30℃ to 50℃ |
| Pulse Energy | 70V,100V,200V, 300V, 400V, 500V selectable |
| Rectification | Positive half wave, negative half wave, full wave, RF System |
| Bandwidth | 0.2 to 25 MHz |
| Gate Monitors | Two independent gates controllable over entire sweep range |
| Sensitivity | 120 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB |
| Transducer Connections | BNC or LEMO |
500 independence setup, any criterion can be input freely, we can
work in the scene without test block；
Big memory of 1000 A graph
Internal rechargeable Li-ion battery pack rated 7.2V at 8000 mAh
15 hours nominal operating time depending on display brightness
4 hours typical recharge time
Functions
Automated display precise flaw location(Depth d,level p,distance
s,amplitude,sz dB,).
Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds
reporting of defect acceptance or rejection.
Automated calibration of transducer Zero-point, Angles, Front edge
and material Velocity . ( V2 and two hole )
Convenient to make and use DAC/TCG and AVG to evaluate the echo,
the curve can be modified and compensated.
Connectting U-Disk,the unit can get unlimited memory.
There are 17 standards of in the unit.
Blue tooth connection to mobile device to generate and print
detection reports on-site. AWS D1.1.
Curved Surface Correction feature.
Crack Height Measure function.
Magnify gate:spreading of the gate range over the entire screen
width.
Auto-gain function.
Envelope: Simultaneous display of live A-scan at 70 Hz update rate
and envelope of A-scan
display.
Peak Hold: Compare frozen peak waveforms to live A-Scans to easily
interpret test results.
Scan Freeze:Display freeze holds waveform and sound path data.
Alarm:Beep and LED.
Real Time Clock.
Fill echo.
Capture mark.
Echo color within the Gate.
