SD card High Resolution Digtal Ultrasonic Flaw Detector A Scan B
Scan FD520 with Automated 0 - 120dB gain
Features
- Measurement displaying mode: type A displaying mode
- It is provided with linear reject function, the highest reject is
80% of the screen height;
- switch over arbitrarily among three detecting modes: single-probe
, dual-probe ones and through transmission;
- It has gate setting and alarming function. Can set the position
and width of gate freely on the screen, and can set alarm for
forbidden wave and loss wave respectively;
- 500 detecting channels are available with a separate detecting
parameter and DAC curve in every channel.
- 500 A scanned images, parameters and DAC curves can be stored in
- Two input methods, angles and K value.
- Auto-gain
- Automatic generation of DAC curve by standard test block, 30
points can be recorded at most, three adjustable bias curves are
generated with the function of Correction.
- Automatic generation of AVG curve by three type of flaw
- Make test videos and Auto playback
- Auto shutdown mode to save power ;
- Can playback the saved images, call out the saved A-scan images
from
- Equipped with delete function, with which any data can be deleted
from storage zone;
- Two measuring unit: mm/inch;
- Real-time clock;
- Auto-calibration of probe.
- Memory of peaks.
- Can freeze and defreeze waveform and detection parameters;
- Can lock/unlock the system parameters;
- Measuring of sound path and analyze of echo times;
- Can indicate power state in real time;
- RS232 communication port available;
- Having buzzer prompt during operation;
- Compact, light and easy to operate.
| Designation | Technical Data |
| Range of scanning (mm) | Range of scanning (mm):0～10000 |
| D-delay (ms) | D-delay (ms):-20～+3400 |
| P-delay (ms) | P-delay:0.0～99.99 Adjusting steps: 0.01 |
| MTLVEL(m/s) | MTLVEL:1000～9999 7 fixed levels: 2260,2730,3080,3230,4700,5920,6300 Adjusting steps: 1 |
| Working mode | Single probe (receiving and sending), double probe (one for
receiving and another for sending), transmission (transmission
probe) |
| Frequency of repeating transmitting (MHz) | 0.4–20 |
| Gain adjustment (dB) | 0～110 Adjusting step: 0.0,0.2,0.5,1,2,6,12 |
| Suppress | 0%～80% of screen height, step: 1% |
| Vertical linear error | Vertical linear error is not more than 3% |
| Horizontal linear error | Not more than 0.2% in the scanning range |
| Allowance of detection sensitivity | ≥62 dB |
| Dynamic range | ≥32 dB |
| Alarm | Three modes, i.e. forbidden wave, loss wave and auto |
| Display | Display: high-brightness graphic lattice |
| A-Scan display area | A-Scan display freezing and de-freezing A-Scan filling |
| Waveform displaying way | full wave |
| Detection channel | 10 |
| Data save | 500 A-Scan images (including setting of instrument) |
| Standard communication interface with PC | RS232 |
| Measuring unit | mm/inch |
| Battery | Li battery 4×3.6V 5000mAh |
| Power adaptor | Input 100V～240V/50Hz～60Hz Output 9V～12VDC/3A～4A |
| Working temperature | 0℃～40℃ |
| Working humidity | 20%～90% |
| Port type | BNC |
| Overall dimension (mm) | 210×150×45 |
| Weight (kg) | 1.0 |
| Standard configuration | | Spare parts |
● Host 1 ● One straight probe ● One oblique probe ● One test block ● Two probe lines ● Power adapter 1 ● Two lithium batteries ● Seat Charging Unit 1 ● SD Storage Card ● Reader 1 ● 1 manual ● One copy of certificate, warranty card and packing card | | Instrument bags, straps, belts |
Additional Accessories:
Data managing software
Data managing cables RS232
Straight probe (5MHZ-ф20)
Straight probe (2.5MHZ-ф20)
Straight probe (2.25MHZ-ф20)
Straight probe (1MHZ-ф20)
Angle probe (4MHZ-45degree, 8*9mm)
Angle probe (4MHZ-60degree, 8*9mm)
Angle probe (4MHZ-70degree, 8*9mm)
Angle probe (4MHZ-80degree, 8*9mm)
Angle probe (2MHZ-45degree, 8*9mm)
Angle probe (2MHZ-60degree, 8*9mm)
Angle probe (2MHZ-70degree, 8*9mm)
Angle probe (2MHZ-80degree, 8*9mm)
Probe T/R (5MHz-ф20mm, focus 15mm)
Probe T/R (2.5MHz-ф20mm, focus 15mm)
Connection cable to probe (BNC-BNC)
Connection cable to probe (BNC-Lemo 00)
Connection cable to probe (BNC-Lemo 01)
Connection cable to probe (Lemo 00-Lemo 01)
Lithium ion battery
Power adapter (4A/9V)
Power Cable
Leather case
