Home > Non Destructive Testing Equipment >

YM-A Non Destructive Testing Equipment Penetration Inspection Standard Block

Product Categories

Non Destructive Testing Equipment [864]
Ultrasonic Flaw Detector [120]
X-Ray Flaw Detector [143]
X-ray Pipeline Crawler [17]
Magnetic Particle Testing Equipment [174]
Eddy Current Testing Equipment [33]
Radiography Film Viewer [18]
Ultrasonic Calibration Blocks [50]
Ultrasonic Probe [22]
Radiation Monitoring Devices [20]
Lead Intensifying Screens [7]
Wire Type Penetrameter [6]
Coating Thickness Gauge [107]
Hardness Testing Machine [139]
Portable Surface Roughness Tester [37]
Metallographic Equipment [31]
Portable Vibration Meter [60]

HUATEC GROUP CORPORATION

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

YM-A Non Destructive Testing Equipment Penetration Inspection Standard Block

Ask Lasest Price
Brand Name :	HUATEC
Model Number :	YM-A
Certification :	CE
Price :	USD175-USD195/SET
Payment Terms :	T/T, Western Union,Paypal
Supply Ability :	10 Sets/Month
Delivery Time :	3-5 working days after receipt of your payment

Add to Cart

Product Details
Company Profile

YM-A Non Destructive Testing Equipment Penetration Inspection Standard Block

YM-A Penetration Inspection Standard Block

YM-A type penetration test block (also known as aluminum alloy test block) is used to compare the sensitivity test of different penetrants or the sensitivity comparison of new and old penetrants. The test block has symmetrical defects on both sides A and B, and can be compared with different penetrants for testing, or the same penetrant can be used under different operating methods to determine the standard operation. It can also be used as a penetrant for corrosion testing of aluminum materials.

Maintenance of test blocks:
The comparison test block must be thoroughly cleaned after use to remove any residual penetrant on the test block. After cleaning, soak it in anhydrous ethanol solution for 30 minutes, air dry or blow dry it, and then place it in a test block box and store it in a dry place.

Inspection item	Test method and condition and requirement
Block Material	Through the physical and chemical test type A block material for LY12 aluminum alloy for materials, the chemical components conform to the provisions of ASTM,GB/T3190.
Form and dimensions	By means of a micrometer measurement block length is 76 + 0.1 mm, and the width fifty + / - 0.1 mm, thick and±1 mm. Cut along the length center evenly divided into two pieces, and in block A and B and unity Numbers block length orientation and plate rolling direction. Milling, grinding the surface roughness after treatment for Ra= 1.2u m- 2.5 u m.
Colour	Visual its color is silvery white.
Oxidizing property	In -55℃ ~ 200℃ - store between three years not metamorphism,no oxidation,colour and lustre is silver
Crack	In the same Numbers of the A and B block with dye penetrant inspection method measured random crack 3μm,3μm-5μm and more than 5μm open crack on one side not less than four, and there are two above width is not more than 3μm open crack. Block A and B on the surface crack distribution is similar.

YM-A Non Destructive Testing Equipment Penetration Inspection Standard Block

Product Tags:


*From:	Your email address is incorrect!
*To:	HUATEC GROUP CORPORATION
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!